For a stream idle timeout, start with gateway status and logs before changing credentials or reinstalling tools. The right fix depends on whether the failure sits with your API access, provider, server, channel integration, or client.
When you see "The model stopped responding. Please try again.", capture the first error around that request. Use the sequence below to narrow the problem without changing several settings at once.
Key takeaways
-
Start with OpenClaw status, gateway status, and logs.
-
Prioritize API access, provider outages, server resources, and Telegram authentication.
-
Treat Claude Code timeout settings and model switching as community workarounds.
-
Test a fresh session after each change.
Start with the three OpenClaw triage commands
Run these commands in the environment hosting OpenClaw:
-
Run
openclaw status --allto inspect the overall installation and connections. -
Run
openclaw gateway statusto see whether the gateway is running. -
Run
openclaw logs --follow --json | tail -50to inspect recent diagnostic output.
The last command combines a continuing log stream with tail, so output can wait until the stream ends. For immediate live output, use openclaw logs --follow --json without the pipe.
Read the results before restarting anything. A gateway reported as not running points toward a crash or stopped process. "Disconnected" or "unauthorized" points toward authentication or a connection URL.
Record the request time and the adjacent error lines. Remove API keys, tokens, and private message content before sharing logs.
If the logs show no incoming request, investigate the client or channel first. If they show a request followed by an error, follow that error rather than the generic banner.

Check API access and provider availability first
"Openclaw Not Responding: 10 Common Causes and Fixes" estimates that about 70 percent of cases involve four causes: API access, provider outages, VPS resources, and Telegram tokens. That estimate is a useful troubleshooting order, rather than a diagnosis for every stream idle timeout.
Read HTTP 401 and 429 differently
HTTP 401 means the API key is invalid or revoked. Replace the affected credential in the provider configuration, then restart the gateway.
HTTP 429 means rate limited. For per-minute limits, the reset window is usually about 60 seconds. Pause requests instead of repeatedly resending them.
A zero prepaid balance can behave like an expired key. Look at both the credential and the account balance when authentication previously worked.
Don't rotate a working key to address a rate limit. That changes a separate part of the setup.
Look for a provider outage
Before changing your server, look at the relevant provider status page: status.openai.com, status.anthropic.com, or status.cloud.google.com.
HTTP 500 or 503 errors can accompany provider-side failures. During an incident, pause repeated retries or use another configured model provider.
A clear status page doesn't establish that your individual request succeeded. Continue with local logs if the failure persists.
Free VPS resources before restarting
A small server can stop responding even when the API credentials work. Repeated crashes after several hours make resource checks especially useful.
Find memory and disk exhaustion
Run free -h for memory, df -h for disk space, and dmesg | grep -i oom for out-of-memory kills.
A 2 GB VPS can be exhausted by OpenClaw, a model router, logging, and other processes. A small deployment can use roughly 1.5 GB of RAM before additional workloads.
An OOM entry near the failure time points toward memory pressure. A full filesystem can also prevent logs and application data from being written.
Increase capacity and control logs
Move to at least 4 GB of RAM when the existing server lacks headroom. Adding a 2 GB swap file is another option, although swap is slower than RAM.
Rotate growing logs and remove obsolete files rather than deleting active application directories. Restart the gateway after relieving the resource pressure.
If Ollama is also running locally, account for its model memory separately. Loading a local model adds demands beyond the OpenClaw process.
Fix channel permissions and the OpenRouter URL
A working chat interface helps narrow the search when only a bot or provider integration fails.
When chat works but Telegram or Discord doesn't
For Telegram authentication errors, replace an invalid bot token in the channel configuration. Restart the gateway after updating it.
Telegram group bots also need group privacy turned off through BotFather when they must receive ordinary group messages. A bot that answers direct messages but misses group conversations points toward this setting.
For Discord, enable Message Content Intent in the developer portal.
Use the gateway logs to distinguish a message that never arrived from a request that arrived but failed later. These need different fixes.
When a fresh OpenRouter installation fails
Set https://openrouter.ai/api/v1 as the base URL for the openrouter and arcee provider entries.
A base URL containing only /v1 was associated with OpenClaw issue 69104. The reported symptoms included 404 responses and no OpenRouter billing.
Restart the gateway after correcting the URL. A 404 together with no OpenRouter usage fits a request that never succeeded.
Changing the model won't repair an incorrect endpoint. Correct the connection before testing another model.
Reduce context and try stream idle timeout workarounds
Long conversations and large requests deserve attention after access, availability, and server health.
Keep accumulated context manageable
Keep MEMORY.md under 15,000 characters and explicitly configure a supported model with at least a 64K context window.
The context window is the amount of conversation and supporting material a model can handle at once. A 32K-token model can exhaust it within 20 to 30 exchanges, depending on message size.
Start a fresh session when old conversation history isn't needed. In Claude Code, community users report that /compact helped some failing sessions.
Split large requests into smaller tasks. For file generation, ask the model to write smaller pieces instead of one long response.
Try the reported Claude Code settings
Claude Code users report success adding CLAUDE_STREAM_IDLE_TIMEOUT_MS with the value "600000" inside the env object of ~/.claude/settings.json.
The entry is "CLAUDE_STREAM_IDLE_TIMEOUT_MS": "600000". Preserve the existing JSON structure and other environment variables when adding it.
This is a community-reported workaround, not an established fix for every failure. Others report that switching from Opus to Sonnet helped.
Change one setting at a time, then repeat the same small request. That makes it easier to identify which adjustment helped.

Separate the four reported empty-response causes
Lobsterland describes four causes behind "Agent couldn't generate a response": an OpenRouter URL error, an empty turn, a cron reporting error, and a version regression. That banner alone doesn't identify a stream idle timeout.
Read empty-turn logs carefully
The log line incomplete turn detected with payloads=0 means the request reached OpenClaw but produced no visible output.
Keep the surrounding provider logs with that line. The message alone doesn't establish where the response disappeared.
An empty-turn log confirms that OpenClaw handled the request. It doesn't, by itself, confirm a successful provider response.
For a fresh OpenRouter installation, address the endpoint configuration before treating an empty response as a model problem.
Separate cron reporting from release regressions
An isolated cron run can be labelled failed even when its work succeeded. Lobsterland associates this reporting problem with issue 69360.
Inspect the run's actual output before repeating a task that could send messages or change files.
The same post reports empty assistant turns in OpenClaw 2026.4.14, while 2026.4.12 worked. If failures began immediately after an upgrade, pin the last known-good build and test a fresh session.
Treat that version pair as a reported historical regression, not a universal rollback recommendation.
Verify the fix with a small, repeatable request
Start a fresh session and send a short text-only request. Keep the live logs open and confirm that a visible answer arrives.
Next, repeat the test through the original route, such as Telegram, Discord, or Claude Code. Success in the chat interface doesn't establish that a bot integration works.
If the same request works through a different network connection, inspect the original connection's proxy or firewall settings. If one client works and another fails, concentrate on the failing client before changing shared credentials.
For a previous memory problem, watch RAM and disk usage during normal operation. A successful restart alone doesn't show that the resource problem is resolved.
Resume larger tasks only after the small test succeeds consistently.
Frequently asked questions
Why does my OpenClaw agent stop responding after a few hours?
Compare the failure time with process exits, OOM entries, disk growth, authentication errors, and conversation size.
A growing workload can expose memory pressure or context limits that weren't present at startup. Repeatedly restarting without reading the preceding logs can hide that pattern.
What if Claude Code works in the CLI but not the app?
Community users report this difference, but it doesn't establish a single cause.
Use the working client for a small comparison request. Keep the model and task similar, then compare the failing client's session and settings before replacing credentials used successfully elsewhere.
Restore a reliable response before expanding the task
Match the fix to the evidence: authentication errors need access changes, OOM kills need resource changes, and channel failures need channel checks.
Keep each adjustment small and repeat the same test afterward. A consistent response through the original route is stronger evidence of recovery than a restart or a disappearing error banner.


